2012年3月21日星期三

How to control and improve the full color LED display screen quality

How to control and improve the full color LED display screen quality

How to control and improve the full color LED display quality? Reflect a full-color LED sign LED the important indexes for quality??? What??? First full-color LED device as the most key parts of the LED display, for three reasons:
First of all, LED a full color is used in the largest number of key components, every square metre will use to tens of thousands of only LED;
Second, LED the whole screen is to determine the subject of optical display performance, the direct impact of the monitor's evaluation;
Once again, the LED panel in the overall cost as a proportion of the biggest, ranging from 30% to 70%. The choice of the whole screen LED to more than 50% of quality. If failed to select good LED, other parts of the screen again good can make up for the defect of the display quality.
Reflect a full-color LED screen LED the important indexes for quality mainly are:
A, the failure rate
Widely used because by tens of thousands of even hundreds of thousands of group of red, green and blue three LED the figure to be composed of yuan, the failure of any color LED all can affect whole screen visual effect. Generally speaking, according to industry experience, in the LED panel display begin assembly to aging 72 hours before shipment should be no higher than the failure rate three over ten thousand (refers to the device itself LED the cause failure).
Second, antistatic ability
Leds are semiconductor devices, of electrostatic sensitive, extremely easy cause static failure, the ability to display the life span of the static electricity is very important. Generally speaking, the human body electrostatic model test LED failure voltage should be no less than 2000 V.
Three, attenuation characteristics
Red, green, and blue LED all has to work with the increase of the time and the characteristics of brightness attenuation. LED chips, auxiliary materials quality stand or fall and the package of craft level determines the LED decay rate. Generally speaking, 1000 hours, which light up the test at 20 ma, red LED the attenuation should be less than 10%, blue, green LED the attenuation should be less than 15%. Red, green, and blue attenuation of full-color LED sign display the consistency of the future of the white balance impact, further influence the display screen display the fidelity.
Four, brightness
LED panel screen brightness is an important determinant of brightness. The high brightness LED, use current headroom, the bigger the to save power consumption, maintain stable good LED. LED has a different Angle value, in the chip brightness, given the Angle of the smaller, LED the more bright, but from the point of view of the small screen is. Generally should choose the 100 degree LED to ensure that the screen enough perspective. According to different spacing and different sights led sign display screen, should be in brightness, Angle and price strike a balance.
Five, consistency
Full-color led display screen is by countless red, green, blue LED the figure yuan Mosaic, each color LED the consistency of the wavelength of the light, the brightness of the screen to the consistency, and white balance consistency, chroma consistency. Generally speaking, screen factories require device suppliers to provide five nm wavelength range and 1:1. 3 brightness range of LED, these indicators can be made by spectral color separation machine device suppliers to grade. The consistency of the voltage generally not required.


没有评论:

发表评论