2012年12月20日星期四

Acceptance criteria to talk about outdoor full color LED display


Acceptance criteria to talk about outdoor full color LED display

Acceptance outdoor full-color LED screen can be analyzed from the following six aspects:

    , Restore color color reduction refers to the color displayed by the display color reduction, display and playback source color to remain highly consistent, so as to ensure realistic images.

    Second, the presence or absence of color blocks color blocks is the obvious color difference, color transition between adjacent modules to module units, causing the color blocks phenomenon mainly by poor control system, high gray scale scan lower frequency caused.

    Third, whether the mosaic, dead phenomenon mosaic is refers Always or often black display box, both modules necrosis quality, but off of the main reason for the display connector. Dead Always or often appears on the LED screen black single dead point how many good or bad by the die to decide.

    LED display of the flatness of the surface flatness to within ± 1mm​​, to ensure that the display image is not distorted, locally raised or recessed cause the viewing angle of the display appears dead ends. The quality of flatness is determined mainly by the production process.

    , Brightness and viewing angle indoor full color brightness to 800cd/m2 above, outdoor full color led screen brightness to 1500cd/m2 above, in order to ensure the display work properly, otherwise it will not because it's too dark to see Qing of the displayed image. The size of the brightness from the LED die is good or bad decision. Display how much the audience directly determine the size of the viewing angle, and therefore the bigger the better. The size of the viewing angle is mainly determined by the die package.

    WB results WB results is one of the most important indicators of the led screen display. Taken in the three primary colors of red, green and blue color science the proportion of 1:4.6:0.16 when to appear pure white, white balance bias if the actual percentage point deviation occurs generally pay attention to white bluish, yellowish green phenomenon. The white balance is good or bad is mainly determined by the led display of the control system, reducing die of color also have an impact.
P2 LED Display P3 Indoor LED DisplayP4 Indoor LED Display P5 Indoor LED Display P6 Indoor LED Display P7.62 Indoor LED Display P10 Indoor LED Display P10 Outdoor LED Display P12 Outdoor LED Display P14 Outdoor LED Display P16 Outdoor LED Display P18 Outdoor LED Display P20 Outdoor LED Display P25 Outdoor LED Display P31.25 Outdoor LED Display P31.25 Outdoor LED Curtain Display P62.5 Outdoor LED Curtain Display P12.5 Indoor LED Mesh Display P20 Indoor LED Mesh Display P25 Indoor LED Mesh Display P18 Outdoor LED SMD Strip Display P25 Outdoor LED SMD Strip Display P31.25 Outdoor LED SMD Strip Display Multifunctional LED Floor Display Super Slim Aluminum Panel LED Display Die-casting Aluminum LED Display Super Slim Perimeter LED Display Multifunctional Perimeter LED Display High resolution lightbox led display Full Color LED Traffic Display Bicolor LED Traffic Display Single color LED Traffic Display Curved LED display screen Rental LED Display LED Strip Display Special LED Display Outdoor LED display Indoor LED Display Slim LED display Die-cast LED display Stadium LED Display LED Mesh Display Stage LED Display LED Curtain Display LED Dancing Floor Lightbox LED Display Traffic LED Display Rental LED Display LED Strip Display Special LED Display LED board LED wall LED panel led display led screen led display screen Manufacturer in China!

没有评论:

发表评论