Full-color led display the most key components are LED devices. Three reasons: first, full color leds are used in the appliance the largest number of key parts, every square metre can use to tens of thousands of only LED, Second, the LED display is to decide whole screenful optical properties of the subject, the direct impact of the display evaluation; Third, in led display the overall cost proportion in the largest, ranging from 30% to 70%.
Leds are full-color led display of the most key components, equivalent to computer CPU. LED choice has decided the whole display more than 50% of quality. If failed to select good LED, display other components again good can make up for screen quality defects.
Full-color led screen special LED quality and parameters can be summed up in the following five factors:
1, the failure rate
Because by tens of thousands or even hundreds of thousands of multi-color display group red, green and blue three LED the pixel composition, any color leds failure are affect screen whole visual effect. Generally speaking, according to industry experience, in led screen begin assembly to aging 72 hours before the shipment should be no more than three million failure rate (refers to itself causes of LED device failure).
2, antistatic ability
Leds are semiconductor devices, of electrostatic sensitive, extremely easy cause electrostatic failure, therefore, antistatic ability to display the life is very important. Generally speaking, the LED human electrostatic model test failure voltage should be no less than 2000V.
3, attenuation characteristics
Red, green and blue leds have as working time increased brightness attenuation of properties. Disadvantages of LED chips, auxiliary material quality and packaging process of level determines LED the attenuation rate. Generally speaking, 1000 hours, 20 ma normal light after test, red leds should be less than 10% of the attenuation, blue, green LED the attenuation should be less than 15%. Red, green and blue attenuation consistency for full-color led panel of future white balance impact, thus influence screen display fidelity of.
4, brightness
The led panel brightness is an important determinant of brightness. LED luminance is taller, use current headroom for saving power consumption, the greater the stability, keep LED to have the advantage. LED has a different Angle value, the chip brightness is fixed, under the situation of Angle is smaller, LED the brighter, but display perspective is smaller. Generally should choose 100 degrees to ensure the led sign enough perspective. Aiming at the spacing and different sights differences in brightness, should display, the Angle and price strike a balance.
5, consistency
Full-color display is by innumerable red, green and blue LED the pixel Mosaic, each color LED the luminance, wavelength determines the consistency of the entire screen brightness consistency, white balance consistency, chroma consistency. Generally speaking, screen factories require device supplier provides 5nm wavelength range and 1:1. The brightness of the range of 3, these indicators can be LED by spectral components suppliers testing machine were classified achieved. The consistency of the general voltage don't do requirements.
Because there is Angle LED, reason full-color led sign equally Angle directional, namely when viewed from different angles, its brightness is increasing or decreasing. So, red, green, blue leds Angle consistency will seriously affect different angles white balance consistency, directly affecting the fidelity of color video display screen. To do red, green and blue three LED in different angles of brightness changes when matching consistency, need in encapsulated lens design, raw material selection on strict scientific design, depending on the encapsulation supplier technology level. The normal direction white balance again good display, if LED the Angle of whole screenful consistency is bad, different perspectives on the white balance effect will be bad. LED device of Angle consistency characteristics usable LED Angle measured radiocomm.tester for medium and high-grade screen is especially important.
没有评论:
发表评论