Digital led display to normal tube, you'll have to use the driver circuit to drive each bit code digital tube, which shows us what we want, so according to digital led tube drive mode of different, can be divided into statically and dynamic type two kinds.
A, static shows the driver:
Static drive also called dc driver. Static drive refers to each digital tube every bit code by a single chip I/O port for driver, or use as BCD two - decimal decoder decoding driven. Static drive is the advantage of simple programming and display high brightness, defect is occupied the I/O port more, like driving five digital tube static displays requires 5 x 8 = 40 root I/O port to drive, to know an 89S51 microcontroller available I/O port just 32? So actual applications must increase decoding drive driven, increased the hardware circuit of complexity.
B, dynamic display driver:
Digital tube dynamic display interface is widely used in SCM a display, dynamic drive is one of all digital tube of 8 shows stroke "a, b, c, d, e, f, g, dp" of the same end together, another for each digital tube public extremely COM increase bits choose nt control circuit, bits choose by independent general I/O line control, when the SCM outputs glyph yards, all digital tubes to receive the same glyph code, but it is the digital tube will display the glyph, depends on the microcontroller contrapuntal yuan choose tong COM end circuit control, so we will only need to display the digital tube choice of nt control open, this bits are showing the glyph, not choose the digital tube won't bright.
Through time-sharing turns control all LED digital tube COM end, make each digital pipe, which is controlled by turns display dynamic driver. In turn display process, each yuan digital tube lightened time for 1 ~ 2ms, the result of human visual temporarily leave phenomenon and light-emitting diodes rays of the effect, though actually everybody digital tube is not also lit, but as long as scan speed fast enough to give the impression is a group of stable display material, not a flickering feeling, dynamic and static show the effect of the display is same, can save a lot of I/O port and lower power consumption.
Constant-current driver with the constant current drive to LED digital tube influenced mainly have the following:
1, display effect:
Due to the LED basically belongs to the current sensitive components, its positive pressure drop of dispersion is very big, and also relates to temperature, in order to guarantee the brightness of the digital tube has good uniformity, you need to make its have constant working current, and cannot be temperature and other factors. In addition, when a change in temperature drive chip must be able to automatically adjust the size of the output current to achieve chromatism balance temperature compensation.
2, security:
Even if is a short current overload are also likely to cause permanent damage luminescence tubes, using the constant-current after driving circuit can prevent due to current fault caused by the digital pipe extensive damage.
In addition, we change the vlsi also has a cascade delay switching characteristics, can prevent reverse peak voltage on light-emitting diodes damage. Vlsi also has thermal protection function, when any one of the temperature over a certain value can be automatically shut off, and can be in control of indoor see fault display.
Why digital tube brightness uneven?
There are two big factors affect the brightness consistency. One is the use of raw material selection, one is the chip with digital pipe adopt control mode.
1, raw materials - LED chips VF and brightness and wavelength is a normal distribution,
Even though screening had LED chips, VF and brightness and wavelength already in a small area, the goods manufactured or in a range, the result is brightness inconsistent.
2, to ensure the LED digital tube brightness, as in control mode selection also have a difference
The best way is to constant-current control, through every light-emitting diodes currents are the same, so that light emitting diodes looks brightness is the same. Such as constant pressure control, then lead to different VF light-emitting diodes to current is not the same, so brightness is different also. Of course these two conditions complement each other.
How to measure digital tube pins, points of Yin and Yang altogether?
Find public altogether Yin and Yang public altogether, first, we find a power supply (3 to 5 volts) and different specifications of resistance, the VCC string connect a resistor in arbitrary after &gnd pick two feet, combination has a lot of, but there is always a LED will shine find one was enough, then use the GND motionless, the VCC (string resistance) the rest of the feet and one touch if multiple LED (typically 8), then it is altogether Yin. Instead the VCC motionless, with the rest of the GND region.then touch feet, if have multiple LED (typically 8), then it is altogether Yang. Also can use directly digital multimeter, red pens and power the anode, black, pens and power anode.
led screen led panel led sign led billboard outdoor led display led spotlight led bulb led par light Indoor led display arc led screen rental led panel stage led sign signle led billboard manufacturer in China
没有评论:
发表评论